প্রশ্নব্যাংক

Admission Admission Model Test MCQ — একটি ব্যাটারি, যার ইএমএফ \(E = 12\,\text{V}\) এবং অভ্যন্তরীণ রোধ  \

AdmissionAdmission Model Testভার্সিটি বিজ্ঞান - পূর্ণাঙ্গ মডেল টেস্ট ০২
8টি সম্পর্কিত প্রশ্ন — MCQ অনুশীলন মোড
1.
একটি ব্যাটারি, যার ইএমএফ E=12VE = 12\,\text{V} এবং অভ্যন্তরীণ রোধ r=4Ωr = 4\,\Omega, সেটি RL=8ΩR_L = 8\,\Omega লোডের সাথে সংযুক্ত করা হলো। লোডটিতে ব্যয়িত ক্ষমতা কত? (A battery with emf E=12VE = 12\,\text{V} and internal resistance r=4Ωr = 4\,\Omega is connected to a load RL=8ΩR_L = 8\,\Omega. What is the power dissipated in the load?)
2.
একটি প্রত্যাবর্তী কার্নো ইঞ্জিন 27°C এবং 327°C তাপাধারের মধ্যে কাজ করে। এটি প্রতি চক্রে ঠান্ডা তাপাধারকে
300J300\,\text{J}
তাপ ত্যাগ করে এবং প্রতি সেকেন্ডে ২টি চক্র সম্পন্ন করে। ইঞ্জিনের মোট ক্ষমতা কত? (An ideal reversible Carnot engine operates between 27°C and 327°C. It rejects 300J300\,\text{J} to the cold reservoir per cycle and runs at 2 cycles per second. What is the net power output?)
3.
একটি আদর্শ গ্যাস রুদ্ধতাপীয়ভাবে
2.0×105Pa2.0\times10^{5} \text{Pa}
,
0.020m30.020 \text{m}^3
অবস্থা থেকে
0.050m30.050 \text{m}^3
পর্যন্ত প্রসারিত হয়। গ্যাসটির
γ=1.4\gamma = 1.4
। হিসাব সহজ করার জন্য চূড়ান্ত চাপ দেওয়া আছে:
5.0×104Pa5.0\times10^{4} \text{Pa}
। গ্যাসের দ্বারা কৃত কাজ
WW
কত? (An ideal gas expands adiabatically from 2.0×105 Pa2.0\times10^{5}\ \text{Pa}, 0.020 m30.020\ \text{m}^3 to 0.050 m30.050\ \text{m}^3, with γ=1.4\gamma=1.4. To ease calculation, the final pressure is given: 5.0×104 Pa5.0\times10^{4}\ \text{Pa}. What is the work done by the gas, WW?)

আরো হাজারো প্রশ্ন + মডেল টেস্ট

ফ্রি রেজিস্ট্রেশন করো — ফেভারিট, AI টিউটর, লিডারবোর্ড ও অ্যানালিটিক্স আনলক করো।

4.
একটি হুইটস্টোন ব্রিজের চারটি বাহু
P,Q,RP, Q, R
এবং
SS
-এ যথাক্রমে
10Ω, 20Ω, 15Ω10\,\Omega,\ 20\,\Omega,\ 15\,\Omega
এবং
60Ω60\,\Omega
রোধ আছে। ব্রিজটিকে সাম্যবস্থায় আনতে চতুর্থ বাহু
SS
-এ কত রোধ কীভাবে যুক্ত করতে হবে? (In a Wheatstone bridge, the four arms P,Q,R,SP, Q, R, S are 10Ω, 20Ω, 15Ω, 60Ω10\,\Omega,\ 20\,\Omega,\ 15\,\Omega,\ 60\,\Omega respectively. To balance the bridge, what resistance and how should it be connected in arm SS?)
5.
দূরত্ব অপরিবর্তিত রেখে দুটি সমআকারের পরিবাহী গোলকে যথাক্রমে
xCx\,\text{C}
yCy\,\text{C}
চার্জ দেওয়া হলো। এখন গোলক দুটি একবার স্পর্শ করিয়ে (চার্জ পুনর্বণ্টিত হয়ে) তাদের আবার আগের অবস্থানে ফিরিয়ে রাখা হলো। স্পর্শের আগে ও পরে তাদের মধ্যে কুলম্ব বলের অনুপাত (আগে : পরে) কত? (Two identical conducting spheres carry charges xCx\,\text{C} and yCy\,\text{C}. They are touched together once and then returned to their original separation (distance unchanged). What is the ratio of the electric force before to after contact, i.e., before : after?)
6.
একটি বৈদ্যুতিক হিটার (হিটিং কয়েল
6Ω6\,\Omega
)
12V12\,\text{V}
উৎসে সংযুক্ত করে
55
মিনিট চালানো হলো। এ সময়ে উৎপন্ন তাপশক্তি কত? (An electric heater with a 6Ω6\,\Omega heating element is connected to a 12V12\,\text{V} source and run for 55 minutes. How much heat is generated?)
7.
ইয়ং-এর দ্বি-চিড় পরীক্ষায় তরঙ্গদৈর্ঘ্য
600nm600\,\text{nm}
এবং চিড়দ্বয়ের মধ্যবর্তী দূরত্ব
0.30mm0.30\,\text{mm}
স্থির রেখে পর্দা থেকে চিড়ের দূরত্ব
0.50m0.50\,\text{m}
বাড়ানো হলো। ডোরা প্রস্থের পরিবর্তন কত? (In YDSE, with λ=600nm\lambda=600\,\text{nm} and slit separation d=0.30mmd=0.30\,\text{mm} fixed, the screen distance is increased by 0.50m0.50\,\text{m}. What is the change in fringe width?)
8.
একক চিরে অপবর্তনে তৃতীয় গৌণ চরম বিন্দু কেন্দ্র থেকে
x=5.0cmx = 5.0\,\text{cm}
দূরে দেখা গেল। লেন্সের ফোকাস দূরত্ব
f=10.0cmf = 10.0\,\text{cm}
। এই চরম বিন্দুটির বিচ্যুতি কোণ
θ\theta
কত? [In a single-slit diffraction experiment, the third secondary maximum is observed at a distance of
x=5.0cmx = 5.0\,\text{cm}
from the center. The focal length of the lens is
f=10.0cmf = 10.0\,\text{cm}
. What is the angle of deviation
θ\theta
for this maximum?]

আরো প্রশ্ন দেখো

আরো হাজারো প্রশ্ন + মডেল টেস্ট

ফ্রি রেজিস্ট্রেশন করো — ফেভারিট, AI টিউটর, লিডারবোর্ড ও অ্যানালিটিক্স আনলক করো।